State of knowledge on technological approaches to enhance the teaching of Computer Numerical Control (CNC)

Authors

DOI:

https://doi.org/10.14571/brajets.v18.n2.476-486

Keywords:

CNC teaching, Computer Numerical Control, virtual simulators, educational resources

Abstract

This state of knowledge addresses the teaching of Computer Numerical Control (CNC), a fundamental technology for modern manufacturing, and the challenges faced due to the high costs associated with the acquisition and maintenance of CNC equipment. The objective is to systematically review the existing literature on the topic, focusing on the technological solutions proposed to overcome these financial barriers and improve the teaching-learning process. The author conducted a comprehensive review using databases such as IEEE, CAPES Journals Portal, and BDTD, selecting relevant studies on virtual simulators, augmented reality applications, online platforms, and low-cost CNC machine development projects for educational purposes. The analysis of these works highlights the need for a free, innovative, and fully didactic platform to efficiently teach CNC programming. Existing simulators, while providing a virtual experience, lack efficient pedagogical resources to assist students in understanding fundamental concepts. Furthermore, many of these simulators require prior knowledge, hindering the learning process for beginners. The state of knowledge emphasizes the importance of overcoming cost and access barriers by offering a solid pedagogical approach, specifically designed to teach CNC programming intuitively and gradually, guiding students from basic concepts to the creation of more complex programs, providing interactive resources, practical exercises, and constant feedback.

Author Biography

Isac Barbosa, IFRN

Isac Barbosa de Almeida is a Mechanical Engineer who graduated from the Federal University of Rio Grande do Norte (UFRN) in 2013. He holds a Master's Degree in Mechanical Engineering also from UFRN, completed in 2016, with a dissertation titled "Analysis of bearing failures through vibration analysis applied to wind turbines," supervised by Prof. Dr. Efrain Pantaleon Matamoros.

Currently, he is a Professor at the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN), at the Mossoró Campus, where he has been working under an exclusive dedication regime since 2014. Throughout his professional career, he has significantly contributed to the technical and higher education of future engineering professionals.

References

Abdulrasool, S., Mishra, R., Khalaf, H. (2010). Teachers' and Students' Attitudes Towards Traditional and Computer Assisted Blended Teaching and Learning Processes in Mechanical Engineering Subjects Area. 10th IEEE International Conference on Computer and Information Technology. 2010, Bradford, 1436-1441.

Alves, I. F., Schimiguel, J., de Araújo, M. S. T. (2013). Vantagens do uso de simuladores gráficos no curso de programação em CNC para alunos de engenharia mecânica. Revista de Ensino de Engenharia, 32(1).

Botko, F., Hatala, M., Kormoš, M., Ungureanu, N., Šoltés, P. (2015). Using Edgecam for creating CNC programs in education process. In: 2015 IEEE 13th International Symposium on Applied Machine Intelligence and Informatics (SAMI), IEEE, 255-259.

Caixeta, F. A. (2016). PROJETO DE UM SIMULADOR DE MÁQUINAS CNC EMPLATAFORMA WEB, Engenharia de Controle e Automação, Universidade de Brasília Brasília, Brasília, 2016.

Dos Santos, D. A., Fonseca, L. C. C., Pinto, M. S. S., Ribeiro, F. A. A. (2022). Protótipo CNC: um novo recurso para ambientes maker como apoio didático ao ensino/aprendizagem em cursos de Robótica Educacional. Research, Society and Development, 11(6), e40711629161-e40711629161.

Dos Santos, J. P. A., Ota, J. I. Y., Macedo, P. D. P. L., Delmondes, R. D. C., Araújo, M. A. A. D. (2023). Soluções adaptadas de baixo custo para o desenvolvimento de máquina de manufatura híbrida. Tecnologia em Metalurgia, Materiais e Mineração, 20.

Gomes, J. C. (2020). Construção de fresadora de baixo custo controlada computacionalmente, para aplicações didáticas. Revista Eixo, 9(2), 13-26.

Güler, O., Yücedağ, I. (2018). Developing an CNC lathe augmented reality application for industrial maintanance training. 2018 2nd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), IEEE, 1-6.

Kesler, D., Arntz, A., Friedhoff, J., Eimler, S. C. (2020). Mill instructor: Teaching industrial cnc procedures using virtual reality. 2020 IEEE International Conference on Artificial Intelligence and Virtual Reality (AIVR), IEEE, 231-234.

Kitchenham, B. (2004). Procedures for performing systematic reviews. Keele, UK, Keele University, 33(2004), 1-26.

Marinho, A., Pedrisch, R., Magalhães, J., Milena, A., Santos, A. V. A. (2022). Desenvolvimento de máquina de comando numérico de baixo custo para auxílio nos métodos de ensino e aprendizagem na engenharia. Congresso Brasileiro de Automática-CBA.

Min Jou, H. Z. (2005). Development of an e-learning system for teaching machining technology. International Conference on Active Media Technology, Kagawa, 347-352.

Min Jou, H. Z., C. L. (2005). Development of an interactive e-learning system to improve manufacturing technology education. Fifth IEEE International Conference on Advanced Learning Technologies, Kaohsiung, 359-360.

Miranda, R. J. C. D. (2009). Desenvolvimento De Um Programa Didático Computacional Destinado à Geração De Códigos De Comando Numérico a Partir De Modelos 3D Obtidos Em Plataforma CAD Considerando a Técnica Prototipagem Rápida [Dissertação, Universidade Federal de Minas Gerais], Engenharia Mecânica Belo Horizonte.

Muthupalaniappan, N., Maruthupandi, A., Pandian, S., John Paul Antony, A., Shunmugham, R. (2014). A low-cost web-based learning platform for CNC machining education. 2014 Sixth International Conference on Advanced Computing (ICoAC), IEEE, 91-96.

Prianto E. , Maryadi, T. H. T., Sunomo, S., Malik, C. (2019). Mini CNC Design to Increase Students’ Programming and Control CNC Competencies. Journal of Physics: Conference Series. IOP Publishing.

Sanches, J. M. (2009). Desenvolvimento de uma fresadora CNC de baixo custo para fins didáticos [Dissertação, Universidade de São Paulo], Projeto Mecânico, São Carlos, 2009.

Shivakumar, T., Sravan, M. S., Selvajyothi, K. (2016). Python based 3-Axis CNC plotter. 2016 IEEE International Conference on Power and Energy (PECon), IEEE, 823-827.

Tsai, J., Kao, Y., Lee, R. (2012). Investigating the effect of virtual reality application on teaching assistance for machine tools operation education. 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), 626-631.

Yang, W., Qiao, L. (2010). Intelligent environment for CNC machine operator training. International Conference On Computer Design and Applications. 2010, Qinhuangdao, 399-403.

Published

27-06-2025

How to Cite

Barbosa, I., Katarina de Monteiro Marques, C., Oliveira Nunes, A., Maria Campos Alves, S., & Pereira Bezerra, D. (2025). State of knowledge on technological approaches to enhance the teaching of Computer Numerical Control (CNC). Cadernos De Educação Tecnologia E Sociedade, 18(2), 476–486. https://doi.org/10.14571/brajets.v18.n2.476-486

Issue

Section

Article